Windows 8.1 Update KB 2919355 Error 0x8007003

It’s been long, too long since the last post. However, never fear as we have plenty of new updates in the pipeline (pun intended!). This post is a little off topic but one that might help one or two people with the latest Windows 8.1 Update 1.

Whilst installing the latest Windows 8.1 Update 1 (and also KB2894853) on a couple of machines I saw the following error:

Installation Failure: Windows failed to install the following update with error 0x8007003: Update for Windows (KB2919355)

A quick Google landed me here which mentions that you will receive this error if the profiles directory is redirected with a registry key. As we have small SSDs in the office machines, the profile directory is indeed redirected to a bigger, spinning disk. This article is a little confusing (hence the post) as it states:

After putting a copy of UserProfiles on the C: drive, installation finished normally.

To fix the installation error we need to ensure that the Default directory is present in the redirected folder location, not on the C: drive. A quick copy of C:\Users\Default to D:\Users\Default fixed the installation issues with both updates.

Citrix HDX RealTime Media Engine Fails to Install

Since the recent release of the Citrix HDX RealTime Optimization Pack for Lync, one of my colleagues Simon Pettit has been installing and configuring it on our development XenDesktop environment. The Citrix HDX RealTime Optimization Pack for Lync can be installed with both Citrix XenApp and Citrix XenDesktop. In our scenario we’re installing onto Citrix XenDesktop but it is equally applicable to Citrix XenApp. The installation has two install components:

  1. HDX RealTime Connector (HDX RealTime Connector LC.msi) that’s installed on the XenDesktop virtual machine;
  2. HDX RealTime Media Engine (Citrix HDX RealTime Media Engine.msi) that should installed on the endpoint device connecting the XenDesktop virtual machine.

Once Step 1 had been completed, we were then in a position to complete Step 2 – and this is where I started to have issues. No sooner had I started the installation I was faced with this warning message.


Now I knew for a fact that I had the Citrix Receiver installed and working so the warning message was infact lying!! – but why?

So I next decided to crack open the MSI, in one of my must have tools InstEd, and see what logic the MSI was using to determine why the Citrix Receiver wasn’t installed. The first place I always look is the CustomAction Table; this is where some ISVs love to try and cheat the built-in methods within the Windows Installer, i.e. using the AppSearch Table and a like. Please don’t use Custom Actions; I hate them with a passion?!

Looking in the CustomAction Table we can see two actions “CheckCitrixPluginVersion” and “CitrixPluginNotFound” which look like our culprits. You should also probably notice the source of all this evil is coming from the file “Install.vbs”.


The “Install.vbs” file can be found in the Binary table where such evils are normally hidden Devil!! Now as this file is embedded into the MSI, we CAN’T easily see what logic the ISV has implemented. Did I mention, that this is why I hate them with a passion Angry smile?


Now luckily we can use InstEd to export the contents of the table by simply right clicking on the table and selecting “Export Table” (and selecting the location where to export the table to). If we now browse to the destination folder we will see a “Binary” (named after the table name) directory which will contain the files in the Binary table.


We can now open the file up in our favourite text editor and take a peek inside to see what’s going on. So lets look at the contents of this file:

[code]Sub CheckRunningApp()

Set objWMIService = GetObject(“winmgmts:\\.\root\cimv2”)


Set colProcesses = objWMIService.ExecQuery _

(“SELECT * FROM Win32_Process WHERE ” & _

“Name = ‘MediaEngineHost.exe'”)


If colProcesses.Count > 0 Then

Session.Property(“APP_RUNNING”) = “1”

End If

End Sub


Sub CheckCitrixVersion()

Dim strComputer

Dim oReg

Dim strKeyPath

Dim strCitrixReceiverVersion

Dim strMinCitrixReceiverVersion

Dim strCitrixInstallFolder

Dim strKeyCitrixPathPath

Dim strKeyCitrixVerPath

Dim bHasAccess

Const HKEY_LOCAL_MACHINE = &H80000002


strComputer = “.”



strCitrixInstallFolder = “”

strKeyCitrixPathPath = “”

strKeyCitrixVerPath = “”



Set oReg = GetObject(“winmgmts:{impersonationLevel=impersonate}!\\” & strComputer & “\root\default:StdRegProv”)

strKeyPath = “SOFTWARE\Wow6432Node\Citrix\ICA Client”

oReg.CheckAccess HKEY_LOCAL_MACHINE, strKeyPath, &H20000, bHasAccess


if (Err.number=0 and bHasAccess=true) Then

strKeyCitrixVerPath = “SOFTWARE\Wow6432Node\Citrix\InstallDetect\{A9852000-047D-11DD-95FF-0800200C9A66}”

strKeyCitrixPathPath = “SOFTWARE\Wow6432Node\Citrix\Install\ICA Client”



strKeyPath = “SOFTWARE\Citrix\ICA Client”

oReg.CheckAccess HKEY_LOCAL_MACHINE, strKeyPath, &H20000, bHasAccess


if (Err.number=0 and bHasAccess=true) Then

strKeyCitrixVerPath = “SOFTWARE\Citrix\InstallDetect\{A9852000-047D-11DD-95FF-0800200C9A66}”

strKeyCitrixPathPath = “SOFTWARE\Citrix\Install\ICA Client”

end if

end if


if(Err.number=0 and bHasAccess=true) then

oReg.GetStringValue HKEY_LOCAL_MACHINE, strKeyCitrixVerPath, “DisplayVersion”, strCitrixReceiverVersion

if (StrComp(strCitrixReceiverVersion,strMinCitrixReceiverVersion)>=0) Then

Session.Property(“CITRIX_VERSION_112”) = “1”


Session.Property(“CITRIX_VERSION_112”) = “0”

End If


oReg.GetStringValue HKEY_LOCAL_MACHINE, strKeyCitrixPathPath, “InstallFolder”, strCitrixInstallFolder


if (Err.number=0) Then

Session.Property(“CITRIX_PATH”) = strCitrixInstallFolder


Session.Property(“CITRIX_PATH”) = “0”

end if


Session.Property(“CITRIX_VERSION_112”) = “0”

Session.Property(“CITRIX_PATH”) = “0”

end if

End Sub


Sub SetMEHostLocationsValue()

installPath = Session.Property(“INSTALLDIR”)

If IsNull(installPath) Or Len(installPath) = 0 Then

Exit Sub

End If


locationsStr = Session.Property(“MEHOST_LOCATIONS_ENTRIES”)


If IsNull(locationsStr) Or Len(locationsStr) = 0 Then

newLocVal = installPath


tempVarStr = Session.Property(“%TEMP”)

If Not IsNull(tempVarStr) and Len(tempVarStr) > 0 Then

newLocVal = newLocVal + “;%TEMP%”

End If


If InStr(locationsStr, installPath) = 0 Then

newLocVal = installPath + “;” + locationsStr


newLocVal = locationsStr

End If

End If


Session.Property(“MEHOST_LOCATIONS_ENTRIES”) = newLocVal

End Sub[/code]

Now I’m not going to talk through the logic of the VBScript line by line as you can do that yourselves. However, I will draw your attention to these bits:

[code]strKeyPath = “SOFTWARE\Wow6432Node\Citrix\ICA Client”
oReg.CheckAccess HKEY_LOCAL_MACHINE, strKeyPath, &H20000, bHasAccess[/code]


[code]strKeyPath = “SOFTWARE\Citrix\ICA Client”
oReg.CheckAccess HKEY_LOCAL_MACHINE, strKeyPath, &H20000, bHasAccess[/code]

You can see the VBScript is checking in HKEY_LOCAL_MACHINE for the existence of certain registry values that determine if the Citrix Receiver is installed (or not) and setting Windows Installer Properties that instruct the MSI to display the warning message we originally received.

Having now found out where it is determining this information, I checked those related HKLM registry keys on my local machine and surprise surprise, they weren’t there! So it’s taken me a while to find out why I’m getting the warning message (I could have potentially just used ProcMon when running the installer – but this blog also gives you some handy insight into the workings of Windows Installer Winking smile). Interestingly those very same registry keys are present in HKCU!


I hope you’re still with me? If you are, it begs the question “why when I installed the Citrix Receiver did these registry keys appear in HKCU?” If you were looking at the above screen shot very closely, you will also notice that the Citrix Receiver files are installed into my profile too!?


Well as it turns out the answer is simple, if not flawed in my view (but that’s another post). I installed the Citrix Receiver as my “standard” user account i.e. no admin privileges and as such the Citrix Receiver installed the files into my profile and registry keys into HKCU. The HDX RealTime Media Engine installer is obviously unaware that this is at all possible hence why its only checking HKLM.

So in conclusion, for the HDX RealTime Media Engine install to work without the warning message, you need to have installed the Citrix Receiver as an administrator. This will ensure the files are installed into either “%ProgramFiles%” or “%ProgramFiles(x86)%” and the registry keys into HKEY_LOCAL_MACHINE. If you’re (thinking of) operating a BYOC scheme you will probably need to be aware of this as your users won’t be and who knows what they’re doing!

Thanks for staying with me on this one – but I hope it was worth the wait Smile.